DuPont ™ SafeSPEC ™

Features and Benefits

Product Details

• Available Options
• Finished Dimensions
• Specifications
• Additional Equipment Needed

Available Options

Finished Dimensions

Specifications

1. The garment shall be constructed of DuPont™ Tyvek® 800J.
2. The garment shall be white in color.
3. The garment shall have a front Tyvek® 400 zipper closure with adhesive storm flap.
4. The garment shall have elastic ankles and wrists.
5. The garment shall have self-adhesive chin flap for tight seal of suit to the mask.
6. The garment shall be a coverall design.
7. The garment shall have a hood.
8. The garment shall have serged and over taped seams.
9. The garment shall have elastic thumb loops.
10. The garment shall have an elastic waist.

Additional Equipment Needed

• Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.

Fabric Data

• Physical Properties
• Chemical Resistance Data
• Special Warnings

Physical Properties - Typical Values

Tyvek® 800J - Fabric Data

Property	Test Method	Result
Basis Weight	DIN EN ISO 536	59 g/m2
Puncture Resistance	EN 863	15 N
Tear Resistance - Trap Tear (MD)	EN ISO 9073-4	31 N
Tear Resistance - Trap Tear (CD)	EN ISO 9073-4	32 N
Tensile Strength (MD)	DIN EN ISO 13934-1	93 N
Tensile Strength (XD)	DIN EN ISO 13934-1	72 N
Resistance to Water Penetration	DIN EN 20811	>25 kPa (>100 inches H2O)
Surface Resistivity (25% RH), inside**	EN 1149-1	< 2.5 x 10^9 ohms/square
Surface Resistivity (25% RH), outside**	EN 1149-1	No antistatic treatment
Wearing Apparel Flammability	16 CFR 1610	Class 1

Chemical Resistance Data

 DuPont Permeation Guide

Special Warnings

1. *Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
2. Tyvek® 800J contains natural rubber latex which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1-800-441-3637 so that an investigation can be initiated.
3. **Garments made using Tyvek® 400, Tyvek® 500, Tyvek® 600 and Tyvek® 800J fabrics will burn and possibly melt. None of these garments should be worn near heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited to, Nomex® IIIA or Nomex® Comfort garments.
4. *CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the nature and level of hazards and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher penetration rates than the fabric. Please contact DuPont for specific data. These garments are intended for limited use and should be disposed of after single use. If fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc are damaged, end user should discontinue use of garment to avoid potential exposure.

Product Accessories

	TY450S WH Tyvek® 400 Shoe Cover Tyvek® Sole 5" High Serged Seams Part number: TY450SWHxx020000
	TY450S WH option LG Tyvek® 400 Shoe Cover Tyvek® Sole 8.25" High Serged Seams Part number: TY450SWHxx0200LG
	TY452S WH Tyvek® 400 Boot Cover Tyvek® Sole 10" High Serged Seams Part number: TY452SWHxx010000
	TY454S WH Tyvek® 400 Boot Cover Tyvek® Sole 18" High Serged Seams Part number: TY454SWHxx010000
	TY454S WH option SR Tyvek® 400 Boot Cover Tyvek® 400 FC Skid-Resist. Sole 18" High Serged Seams Part number: TY454SWHxx0100SR
	FC450S GY Tyvek® 400 FC Shoe Cover Tyvek® 400 FC Skid-Resist. Sole 5" High Serged Seams Part number: FC450SGYxx020000
	FC454S GY Tyvek® 400 FC Boot Cover Tyvek® 400 FC Skid-Resist. Sole 18" High Serged Seams Part number: FC454SGYxx010000
	P3450S GY ProShield® 70 Shoe Cover ProShield® 70 Skid-Resist. Sole 5" High Serged Seams Part number: P3450SGYxx020000
	P3450S GY option LG ProShield® 70 Shoe Cover ProShield® 70 Skid-Resist. Sole 8.25" High Serged Seams Part number: P3450SGYxx0200LG
	P3454S GY ProShield® 70 Boot Cover ProShield® 70 Skid-Resist. Sole 18" High Serged Seams Part number: P3454SGYxx010000
	TY500S WH Tyvek® 400 Sleeve 18" Long Elastic at Both Ends Serged Seams Part number: TY500SWHxx020000
	QC500B YL Tychem® 2000 Sleeve 18" Long Elastic at Both Ends Bound Seams Part number: QC500BYLxx020000
	TY273B WH Tyvek® 400 Bib Apron 28" x 36" Neck Loop & Waist Ties Bound Seams Part number: TY273BWHxx010000
	SL274B WH Tychem® 4000 Bib Apron 28" x 36" Neck Loop & Waist Ties Bound Seams Part number: SL274BWHxx005000
	TY657S WH Tyvek® 400 Hood Shoulder Length Serged Seams Part number: TY657SWHxx010000
	996000 BU Cool-Guard® Vest Cooling Vest w/ Packets Part number: 996000BU00000100
	996030 00 Cool-Guard® Spare Packets Set of Four (4) Part number: 9960300000000100

Product Literature and Videos

Protective Garments Catalog (pdf)	Protective Garments Catalog - Downloadable (MAC)	Protective Garments Catalog - Downloadable (PC)
Interactive Protective Garments Catalog	Cleanroom Cleaning and Disinfection	Protective Clothing for Painting Applications
Protective Apparel for Spray Painting Applications	Silica Technical Bulletin	Tyvek® 800J Brochure
Protective Apparel for Cytostatic Drug Handling	Protective Clothing for Agricultural Workers and Pesticide Handlers	IFU Tyvek® 800J Instructions
Part Number Guide	CE Certificate Tyvek® 800J TY800J	DoC_EN_Tyvek
Bloodborne Pathogens -- What you need to know.	Legionella Technical Bulletin	MERS Technical Bulletin
H1N1 Virus Technical Bulletin	Protective Clothing for Avian Flu	Protective Clothing for Anthrax Response
Protective Clothing for Ricin Response	Mold Remediation	Understanding CE Marking
Hazard Matrix	Flame Protective Clothing for Laboratory Work	Lakeland Cross Over Guide

Frequently Asked Questions

1. How are Tyvek® garments different from other limited-use garments on the market?
2. Are Tyvek® 800J garments flame resistant or flame retardant (FR)?
3. Are Tyvek® 800J garments anti-static or static dissipative?
4. Can these Tyvek® 800J garments be worn in cleanroom applications?
5. How should Tyvek® 800J garments be stored?
6. Is it possible to wash and re-use Tyvek® 800J garments?
7. What determines if the garment is contaminated?
8. What is the shelf life of Tyvek® 800J garments?
9. In what ways can I dispose of Tyvek® 800J garments?
10. In what ways can I manage or prevent heat stress?
11. Where can I find a MSDS (Material Safety Data Sheet) for Tyvek® 800J garments?
12. Are Tyvek® 800J garments latex free?
13. Do Tyvek® 800J garments meet ANSI/ISEA 101 sizing standards?
14. What are Type 3/4/5/6 garment standards?
15. How are Tyvek® 800J garments different from Tyvek® 600, Tyvek® 500 and standard Tyvek® 400 garments?

1.How are Tyvek® garments different from other limited-use garments on the market?

Tyvek® garments are unique in several ways. First is the proprietary flash spun Tyvek® fabric which offers inherent breathable barrier that cannot easily be worn or abraded away. This inherent barrier of Tyvek® is not dependent on a thin film or a thin layer of small fibers -- with Tyvek®, every part of the fabric provides barrier. This delivers an effective breathable barrier to particles due to the torturous path created by this unique fabric structure. Unlike microporous film garments, the breathability of Tyvek® garments can be easily demonstrated. Watch this video to see for yourself.
  top

2.Are Tyvek® 800J garments flame resistant or flame retardant (FR)?

No, Tyvek® 800J garments are not flame resistant or flame retardant and should not be used around heat, flame, sparks or potentially flammable or explosive environments. Tyvek® 800J garments will ignite and continue to burn and melt.

In addition, Tyvek® 800J garments should not be worn under or over a garment made of Nomex® or any other flame resistant fabric, if the potential for fire or electric arc exists.
  top

3.Are Tyvek® 800J garments anti-static or static dissipative?

The fabric used to make Tyvek® 800J garments is treated with a topical antistatic agent to help minimize static build up and reduce nuisance garment cling. In situations where static dissipation level is a critical performance property, end-users should evaluate the performance of their entire ensemble as worn including outer garments, inner garments, footwear and other PPE. In order for any garment system to be static dissipative, it must be able to drain a charge buildup through proper grounding devices, such as, but not limited to, workstation grounding clips or static-dissipative floors. Under certain conditions, such as cold and dry weather, it is possible that garments might build and discharge static electricity. Discharges are not normally dangerous except in situations where the generation of an electrical spark could ignite a flammable atmosphere or startle the wearer. When operating around flammable chemicals, take steps to eliminate potential static discharges. In these situations, suggested steps include, but not limited to, water spray, the use of an overcover, raising humidity level of the work area, use of a commercial, anti-static application coating, grounding straps on equipment and personnel, inherently static-dissipating under- and over-garments, and testing of the worker's static dissipation before entry into the classified area. However, in the case of explosive or flammable atmospheres, even if steps are taken to manage static formation and dissipate static charge, the risk of severe injury remains if an uncontrolled or accidental ignition occurs. Do not wear Tyvek® 800J chemical protective garments in potentially flammable or explosive atmospheres. Do not knowingly enter an environment in which the concentration of flammable gas is within flammable or explosive limits while wearing a Tyvek® 800J garment. If you determine that you are in a potentially flammable or explosive environment, retreat immediately.
  top

4.Can these Tyvek® 800J garments be worn in cleanroom applications?

Tyvek® 800J garments have not been designed for controlled environment applications. DuPont offers a full line of garments that have been specially manufactured, processed and packaged for use in controlled environment applications. Please see our complete line of controlled environment products at www.safespeccleanroom.dupont.com.
  top

5.How should Tyvek® 800J garments be stored?

Store Tyvek® 800J garments in a cool, dark, dry location free of dirt and insects. Sunlight, ozone, high temperatures (>120° F ; 49° C), vehicle exhaust fumes, compression under heavy weights and sharp edges or projections are some conditions known to degrade the materials in these garments.

Store Tyvek® 800J garments in boxes, in bags or on hangers. Never step on protective garments. Never place or store heavy objects on top of protective garments.
  top

6.Is it possible to wash and re-use Tyvek® 800J garments?

DuPont does not recommend washing Tyvek® 800J garments for re-use. These garments are designed for limited-use. They can be worn until damaged, altered or contaminated.
  top

7.What determines if the garment is contaminated?

The decision on whether or not a garment has been contaminated is made by local managers responsible for PPE based on an analysis of the incident in which the garment was used. This analysis may include exposure time, chemicals involved, level of exposure, proximity to the actual release, tasks performed, and environmental monitoring in the area in which the garment was worn. Garments that are damaged, altered, or show signs of contamination, such as discoloration, odor, stiffening or cracks, should not be used.
  top

8.What is the shelf life of Tyvek® 800J garments?

DuPont suggests that Tyvek® garments be used within 5 years of receipt, provided they are properly stored and pass a full visual inspection. High temperature, oxidizing gases, wet, cold, ultraviolet and ionizing radiation can significantly impact the long-term life of garments made of Tyvek®.The antistatic properties may reduce over time. The user must ensure the dissipative performance is sufficient for the application.
  top

9.In what ways can I dispose of Tyvek® 800J garments?

If not contaminated, Tyvek® 800J garments can be recycled. Contact DuPont Protective Apparel Customer Service at 1-800-931-3456 for information on the Tyvek® Garment Recycling Program.

Tyvek® 800J garments may be landfilled or incinerated in accordance with local regulations. Uncontaminated chemical protective garments may be incinerated in a facility that is capable of handling mixtures containing plastics. Likewise, an uncontaminated chemical protective garment may be buried in a facility that accepts plastic materials.

Contaminated garments that cannot be handled safely without protective equipment must be disposed of with other hazardous wastes, either through incineration or landfill per local regulations. Before discarding, cut off a sleeve or a leg so the garments cannot be worn again as protective clothing.
  top

10.In what ways can I manage or prevent heat stress?

Chemical protective clothing can interfere with the natural regulation of body temperature. This can lead to a rise in core body temperature and heat stress. Implementing a conservative work/rest schedule or using a cooling system like the DuPont™ Cool-Guard® vest may be effective in reducing heat stress. (Note: Do not wear cooling vests in potentially flammable or explosive environments.)

Be aware of the symptoms and treatment of heat stress. If you or your co-workers have symptoms of heat stress such as nausea, dizziness, high heart rates, or excessive heat build-up, leave the work area immediately and remove the ensemble as quickly as possible after decontamination and seek professional care.

The maximum length of time the chemical protective clothing can be worn depends on variables such as the air supply, ambient conditions, climate inside the ensemble, physical and psychological conditions of the wearer, work rate and work load. The TLV® pocket guide from the American Conference of Governmental Industrial Hygienists (ACGIH, Cincinnati) provides corrected heat stress limits for some garments. Similar information is available on the federal OSHA web site (www.OSHA.gov). The WBGT correction factor for chemical protective garments is at least 10°C or higher for chemical garments made of impervious films (such as Tychem® garments) and covering the entire body (hooded coverall or encapsulating designs). For Tyvek® coveralls, the WBGT correction factor is 2°C with a hood and 1°C without a hood.
  top

11.Where can I find a MSDS (Material Safety Data Sheet) for Tyvek® 800J garments?

Material Safety Data Sheets (MSDS) are written in accordance with applicable federal regulations, 29 CFR 1910.1200, to communicate health and safety data on usage and handling of hazardous chemicals. Under this regulation, DuPont™ Tyvek® 400, Tyvek® 400 D, Tyvek® 500, Tyvek® 600, Tyvek® 400 FC, ProShield®, ProShield® 70 , ProShield® 50 , ProShield® 10, ProShield® 60, ProShield® 6 SFR and Tychem®, materials and garments are defined as articles, not chemicals, and the MSDS and labeling requirements in that standard do not apply.
  top

12.Are Tyvek® 800J garments latex free?

With the exception of style TY125S with option code DC, DuPont™ Tyvek® 400, Tyvek® 400 D, Tyvek® FC, ProShield®, ProShield® 3, ProShield® 10, ProShield® 60, ProShield® 6 SFR garments are manufactured under specifications that exclude components containing natural rubber latex. Tyvek® 800J, Tyvek® 500, Tyvek® 600, and style TY125S (with option code DC) garments contain natural rubber latex which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1-800-441-3637 so that an investigation can be initiated.
  top

13.Do Tyvek® 800J garments meet ANSI/ISEA 101 sizing standards?

No. DuPont Tyvek® 800J coveralls do not meet ASNI/ISEA 101 sizing standards. For specific sizing dimensions on a particular DuPont garment, please view the Product Details tab for that garment.
  top

14.What are Type 3/4/5/6 garment standards?

Chemical protective clothing certified to a specific Type can have very different performance properties in terms of protection, durability and comfort. The indicated Type simply means that the suit has passed one or more of the whole suit liquid tests and meets the minimum performance requirements for the constituent mechanical and barrier tests. Click to View - Understanding CE Marking.
  top

15.How are Tyvek® 800J garments different from Tyvek® 600, Tyvek® 500 and standard Tyvek® 400 garments?

Tyvek® 800J garments use an innovative fabric technology based on Tyvek® and an enhanced garment design, combining the ability to provide resistance to low-concentration, water-based, inorganic chemicals (even under pressure) with the strength and durability of Tyvek®. Tyvek® 800J garments offer seams that are sewn and then taped, which, when coupled with the innovative fabric; offer improved overall garment system protection levels. These fabric and seam differences along with other enhanced garment design elements represent the key differences between Tyvek® 800J and Tyvek® 600, Tyvek® 500 and standard Tyvek® 400 garments. Because of these enhancements, Tyvek® 800J garments are CE certified to Types 3, 4, 5 & 6. Click to View - Understanding CE Marking.
  top